Nissan Sentra Transmission

Maybe you’re in the market for an older transmission, such as a 2007 Nissan Sentra transmission. EBay regularly has a stock of older model transmissions. Perhaps you’re currently looking for a newer transmission, like a 2013 Nissan Sentra transmission for sale or a 2014 Nissan Sentra transmission. Nissan Sentra Automatic CVT 2007-2012 RE0F10A (JF011E) 2WD REMAN TRANSMISSION (Fits: 2008 Nissan Sentra) $2,195.00 Nissan Sentra MR20DE Auto CVT Low Miles Transmission for 2008.

In this document we discuss how to program a replacement of new Nissan CVT Transmission with Nissan Consult III Plus software. The new replacement transmission you received, there will be a CD included, thats the the CD we are going to use in the programming stage. It has the IP Characteristics data file.

TCM performs accurate gear ratio control by retrieving and storing data (characteristic value). TCM records the degradation level calculated from the vehicle driving status; it is necessary to erase the degradation level data recorded by the TCM.
This function is used when replacing AT/CVT. Before performing the writing operation, check if the serial number matches the one described on AT/CVT assembly. The serial number is stamped on AT/CVT assembly or described on the QR code sticker applied on AT/CVT assembly

Nissan built many vehicles with Continuously Variable Transmission technology, CVT Transmission such as Cube, Murano, Altima, Altima coupe, Maxima, Rogue, Pathfinder, Sentra and Versa.

For this educational tutorial we have in our programming bay 2013 Nissan Altima.

Nissan Sentra Transmission 2014

Perform the following after the transmission assembly is replaced:

1. Open CONSULT and select Diagnosis (One System)

2. Turn the ignition switch ON and insert the TCM data CD into CONSULT.

3. Select “Work Support” in “TRANSMISSION,” on Consult and then select “WRITE IP CHARA - REPLACEMENT AT/CVT.”

4. Select IP Characteristics data file, insert the CD that came with the new Transmission to your CONSULT computer and select the file.


5. Make sure the serial number displayed on CONSULT match with the serial number written in the memo above.

6. Click next and follow the Consult III Plus screen guide. Once completed screen will show 'Data writing completed successfully'.

7. IP Charactrics data on the entered serial number will be written into TCM , click on Write

That completes the process to program replacement of new CVT Transmission.

I have seen new transmission comes without CD and they are already programmed.
End of IP CHAR - REPLACEMENT AT/CVT
Do a test drive and make sure everything is ok Watch bunnicula free.


Leave a comment

Comments will be approved before showing up.

Nissan Sentra Transmission
  1. Nissan »
  2. Sentra »

Nissan Sentra Transmission Fluid Change

  • switch makes
  • switch models

transmission Problems

Here are Nissan Sentra transmission problems, by model year. The most common Sentra transmission problems cost $3,800 to fix & occur at 67,000 miles. Regarding the worst model year 2015 Nissan Sentra transmission problems, 'The 2013-2017 Nissan Sentra has an expensive CVT transmission failure defect that shows up plainly in our complaint data from the earlier model years in this same 7th generation Sentra.'

The worst model years for transmission problems are the 2013 Sentra, 2014 Sentra, and the 2015 Sentra.

Find something helpful? Spread the word.Share on FacebookRetweet this pageEmail this page

Worst Nissan Sentra Transmission Problems

Nissan Sentra Transmission Problems

  • #1:Transmission Failure2015 Sentra

    Average Cost to Fix:
    $4,700
    Average Mileage:
    49,000 mi
  • #2:Transmission Failure2014 Sentra

    Average Cost to Fix:
    $3,500
    Average Mileage:
    79,000 mi
  • #3:Revving And Jerking2013 Sentra

    Average Cost to Fix:
    $3,300
    Average Mileage:
    75,000 mi

Nissan Sentra Transmission Settlement

Bump the Sentra problem graphs up another notch. Get answers and make your voice heard!